Equal Cost Multipath Pathlist with Fabric Connect

Table 1. ECMP Pathlist with Fabric Connect product support

Feature

Product

Release introduced

ECMP Pathlist with Fabric Connect (IS-IS routes)

5320 Series

Fabric Engine 8.6

5420 Series

VOSS 8.4

5520 Series

VOSS 8.2.5

5720 Series

Fabric Engine 8.7

7520 Series

Fabric Engine 8.10

7720 Series

Fabric Engine 8.10

VSP 4450 Series

VOSS 8.1.5

VSP 4900 Series

VOSS 8.1.5

VSP 7200 Series

VOSS 8.1.5

VSP 7400 Series

VOSS 8.1.5

VSP 8200 Series

VOSS 8.1.5

VSP 8400 Series

VOSS 8.1.5

VSP 8600 Series

Not Supported

XA1400 Series

VOSS 8.1.5

ECMP support for Fabric Extend

5320 Series

Fabric Engine 8.6

5420 Series

VOSS 8.4

5520 Series

VOSS 8.2.5

5720 Series

Fabric Engine 8.7

7520 Series

Fabric Engine 8.10

7720 Series

Fabric Engine 8.10

VSP 4450 Series

Not Supported

VSP 4900 Series

Not Supported

VSP 7200 Series

VOSS 6.0

VSP 7400 Series

VOSS 8.0

VSP 8200 Series

VOSS 6.0

VSP 8400 Series

VOSS 6.0

VSP 8600 Series

Not Supported

XA1400 Series

VOSS 8.0.50

If you use Equal Cost Multipath (ECMP) in a Shortest Path Bridging (SPB) scenario, the Intermediate System-to-Intermediate System (IS-IS) protocol sends multiple routes with the same destination to the routing manager. IS-IS can add up to eight equal cost routes with the same destination to the routing table and the router uses one route for traffic forwarding based on load management. Use the ECMP Pathlist feature to control how many equal-cost paths to add to the routing manager for the same destination.

Note

Note

Different hardware platforms can support a different number of ECMP paths. For more information about the maximum number of ECMP paths supported on the switch, see the scaling information in Fabric Engine Release Notes.

For information about how to configure ECMP Pathlist, see Configure ECMP and Configure ECMP.