Display the VXLAN Running Configuration

Note

Note

Exception: only supported on 7520 Series and 7720 Series.

Use the following procedure to display the currently running VXLAN configuration.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Display the running configuration:

    show running-config module vxlan

Example

This example shows the VXLAN information only; it does not show the hardware-specific information that the system also displays in the output for this command. The example shows the VXLAN Gateway in Base Interworking Mode. It also shows an external loopback (see c-vid commands), which enables communication between the VNID and an I-SID in an SPB network.

Switch:1# show running-config module vxlan

#
# VTEP CONFIGURATION
#
vtep source-ip 1.1.1.1 vrf underlay-vxlan

#
# REMOTE VTEP CONFIGURATIONS
#
vtep 2 ip 1.1.1.1 name "vtep-2"
vtep 67 ip 1.1.1.67 name "vtep-67"

#
# VNID CONFIGURATION
#
vnid 12002105 i-sid 102105
c-vid 105 port 1/11
c-vid 2105 port 1/10
vtep 67
exit