|
Feature |
Product |
Release introduced |
|---|---|---|
|
Automatic QoS |
5320 Series |
Not Supported Use Auto-sense with IP Phone support instead. |
|
5420 Series |
Not Supported Use Auto-sense with IP Phone support instead. |
|
|
5520 Series |
Not Supported Use Auto-sense with IP Phone support instead. |
|
|
5720 Series |
Not Supported Use Auto-sense with IP Phone support instead. |
|
|
7520 Series |
Not Supported Use Auto-sense with IP Phone support instead. |
|
|
7720 Series |
Not Supported Use Auto-sense with IP Phone support instead. |
|
|
VSP 4450 Series |
VSP 4000 4.0 |
|
|
VSP 4900 Series |
VOSS 8.1 |
|
|
VSP 7200 Series |
VOSS 4.2.1 |
|
|
VSP 7400 Series |
VOSS 8.0 |
|
|
VSP 8200 Series |
VSP 8200 4.0 |
|
|
VSP 8400 Series |
VOSS 4.2 |
|
|
VSP 8600 Series |
VSP 8600 4.5 |
|
|
XA1400 Series |
VOSS 8.0.50 |
VoIP traffic requires low latency and jitter.
If you use edge routers, configure ingress ports as core ports to treat VoIP traffic appropriately. In this case, the system trusts QoS markings that apply to VoIP traffic, and the system does not re-mark QoS settings. However, if this configuration is not sufficient, you can also apply filters, route policies, or re-mark traffic.