Display the MAC Addresses in the VNID FDB

Note

Note

Exception: only supported on 7520 Series and 7720 Series.

Use the following procedure to display the MAC addresses in the VNID forwarding database.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Display all the VNIDs in the FDB table or use one of the options to specify a particular VNID:

    show vnid mac-address—entry [<1–16777215> | port <{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}> | mac <0x00:0x00:0x00:0x00:0x00:0x00> | remote]

Example

Switch:1# show vnid mac-address—entry
==========================================================================
                              VNID Fdb Table  
==========================================================================
VNID         STATUS  	   MAC-ADDRESS           INTERFACE         TYPE
--------------------------------------------------------------------------
11000065     learned     00:00:5e:00:01:01      vtep_56          REMOTE
14000100     learned     a4:25:1b:51:a5:04      vtep_67          REMOTE
14000100     learned     a4:25:1b:52:a5:04      vtep_67          REMOTE
14000100     learned     a4:25:1b:52:bd:03      vtep_2           REMOTE

c: customer vid   u: untagged-traffic

All 4 out of 4 Total Num of vnid FDB Entries displayed
--------------------------------------------------------------------------