View the Remote DvR Database
Note
This procedure does not apply to 5320 Series and 5420 Series.
Before you begin
Ensure that you enable DvR on the node.
About this task
Perform this procedure to view all remote DvR routes on a Controller or a Leaf node.
The Controller node displays all the IP subnet routes configured for that DvR domain. A Leaf node displays all IP subnet routes learned from the Controller(s) for the Layer 2 VSNs in the DvR Domain. It also displays the Host Routes (ARPs) learned from other DvR enabled nodes.
Procedure
- In the navigation pane, expand .
- Select DVR Remote.
- Select the Database tab.
- Optional: To filter the rows based on the specific criteria, click Filter.
Database Field Descriptions
Use the data in the following table to use the Database tab.
|
Name |
Description |
|---|---|
|
DestIpAddrType |
Specifies the address type of the IPv4 destination address of the DvR database entry. |
|
DestIpAddr |
Specifies the IPv4 destination address of the DvR database entry. |
|
DestMask |
Specifies the destination mask of the DvR database entry. |
|
L3Isid |
Specifies the Layer 3 I-SID of the DvR database entry. |
|
EcmpIndex |
Specifies the ECMP index for the DvR database entry. |
|
NextHop |
Specifies the MAC address of the next hop BEB, in the DvR database entry. |
|
L2Isid |
Specifies the Layer 2 I-SID of the DvR database entry. |
|
VrfId |
Specifies the VRF ID for the DvR database entry. |
|
OutgoingInterface |
Specifies the outgoing interface (port or MLT) of the DvR database entry. |
|
SpbCost |
Specifies the SPB cost of the DvR database entry. |
|
PrefixCost |
Specifies the prefix cost of the DvR database entry. |
|
NextHopName |
Specifies the host name of the next hop BEB, in the DvR database table entry. |
|
Age |
Specifies the uptime since creation of the DvR database table entry. |