Display the OVSDB Controller StatusNEW!

Note

Exception: only supported on 7520 Series and 7720 Series.

Use the following procedure to display the OVSDB controller status.

Procedure

To enter User EXEC mode, log on to the switch.
Display the OVSDB controller status:

show ovsdb controller status

Example

The following is an example of displaying the OVSDB controller status.

SWITCH:1>show ovsdb controller status
==========================================================================================
                                           OVSDB Controller Status
==========================================================================================
Protocol             IP                        Port       status     source
--------------------------------------------------------------------------------
ssl                 192.0.2.2                  6640         Up        Learnt
ssl                 192.0.2.3                  6640         Down      Learnt

2 out of 2 Total Num of Controllers displayed