Display the Name of the Remote VTEP

Note

Note

Exception: only supported on 7520 Series and 7720 Series.

Use the following procedure to display the name of the remote VTEP.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Display the names of all remote VTEPs or use the option to specify a particular VTEP:

    show vtep remote name [<vtepId>]

Example

Switch:1# show vtep remote name
==========================================================================
                              Remote VTEP Name 
==========================================================================
ID     NAME             
-----------------------------------------------------------------------------
1      vxlan_tunnel_1 
2      --
3      --

-------------------------------------------------
  3 out of 3 Total Num of remote vteps
-------------------------------------------------