Before you begin
Mount the AP in the desired location.
About this task
The 30702 (WS-AI-DQ05120) is an indoor panel antenna. It measures 200 mm × 200 mm
× 34 mm and weighs 1.00 lb (0.45 kg). The 30702 only mounts to a wall.
Procedure
- Unpack the antenna from the shipping materials.
- Using the 30702 (WS-AI-DQ05120) antenna holes as a template, mark and drill four, 5 × 35 mm holes on a wall.
- Insert four plastic wall insert plugs into the mounting holes.
- Place a flat washer on every antenna mounting hole template, and insert the self tapping screw through the flat washer.
- Insert the self tapping screws into the plastic wall insert plugs, and tighten the screws.
- Attach the 4 cables to the AP for the specified frequencies. Tighten the RP-SMA connectors to 5 inch-pounds. See the AP installation guide for information on connecting the antenna to the correct ports.
