The AIO-TQ06120-N antenna is a vertical panel antenna. It measures 250 mm x 250 mm x 25 mm (9.84 inches x 9.84 inches x .98 inches) and weighs 0.8 kg (1.76 lbs). It ships with a mounting bracket.
Procedure
Unpack the antenna from the shipping materials.
Assemble the mounting bracket.
The pivot screws should be only finger-tight.
Mount the mounting bracket to the wall or pole.
Tighten the non-pivot mounting hardware to 45 inch-lbs and tighten the pole cable strap screw so they are tight and cannot be moved on the pole.
Assemble the
antenna to the mounting bracket using 4 nuts.
Tighten the nuts to 45 inch-lbs.
Attach the 4 cables to the AP
for the specified frequencies.
Tighten the RP-SMA connectors to 5 inch-pounds. See the AP installation guide for information on connecting the antenna to the correct ports.
Adjust the mounting bracket
angles so the panel antenna is pointing in the desired direction.
