controller-assisted-mobility
Enables controller or service platform assisted mobility to
determine a wireless client‘s VLAN assignment. When enabled, a controller or service
platform‘s mobility database is used to assist in roaming between RF Domains. This option
is disabled by default.
Supported in the following platforms:
- Access Points — AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562,
AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
controller-assisted-mobility
Examples
ap505-13403B(config-wlan-test)#controller-assisted-mobility
ap505-13403B(config-wlan-test)#show context
wlan test
ssid test
vlan 1
bridging-mode local
encryption-type ccmp
authentication-type sae-psk
protected-mgmt-frames optional
controller-assisted-mobility
ap505-13403B(config-wlan-test)#
Related Commands
| no (wlan-config-mode) |
Disables controller or service platform assisted mobility to determine a
wireless client‘s VLAN assignment |
