upgrade-abort

Aborts an ongoing software image upgrade

Supported in the following platforms:

Access Points — AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

upgrade-abort {on <DEVICE-OR-DOMAIN-NAME>}

Parameters

upgrade-abort {on <DEVICE-OR-DOMAIN-NAME>}


upgrade-abort	Aborts an ongoing software image upgrade
on <DEVICE-OR-DOMAIN-NAME>	Optional. Aborts an ongoing software image upgrade on a specified device or domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

Examples

nx9500-6C8809#upgrade ftp://anonymous:anonymous@192.168.13.10/LatestBuilds/NX9500-7.2.1.0-010D.img
Running from partition /dev/mtdblock6
Validating image file header
Making file system
Extracting files (this may take some time)..................

nx9500-6C8809#upgrade-abort

nx9500-6C8809#upgrade ftp://anonymous:anonymous@192.168.13.10/LatestBuilds/NX9500-7.2.1.0-010D.img
Running from partition /dev/mtdblock6
Validating image file header
Making file system
Extracting files (this may take some time)..................
Update error:  Aborted
nx9500-6C8809#