crypto-cmp-cert-update
Triggers a CMP
(Certificate Management Protocol) certificate update on a
specified device or devices
Note
This command and its
syntax is common to both the
User Executable and
Privilege
Executable configuration modes.
Supported in the following platforms:
- Access Points — AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562,
AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
crypto-cmp-cert-update <TRUSTPOINT-NAME> {on <DEVICE-NAME>}
Parameters
crypto-cmp-cert-update <TRUSTPOINT-NAME> {on <DEVICE-NAME>}
| crypto-cmp-cert-update <TRUSTPOINT-NAME> on <DEVICE-NAME> |
Triggers a CMP certificate update on a specified device or devices
- <TRUSTPOINT-NAME> – Specify the target trustpoint name. A trustpoint
represents a CA/identity pair containing the identity of the CA, CA specific
configuration parameters, and an association with an enrolled identity
certificate. Use the crypto-cmp-policy context mode to configure the
trustpoint.
- on <DEVICE-NAME> – Optional. Initiates a CMP certificate update and
response on a specified device or devices. Specify the name of the AP,
wireless controller, or service platform. Multiple devices can be provided
as a comma separated list.
- <DEVICE-NAME> – Specify the name of the AP, wireless controller,
or service platform.
|
Examples
NOC-NX9500#crypto-cmp-cert-update test on B4-C7-99-71-17-28
CMP Cert update success
NOC-NX9500#
