zone
Profile Config Commands
Configures the zone for devices using this profile. The zone can also be configured on the device‘s self context.
Supported in the following platforms:
- Access Points — AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562,
AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Parameters
zone <NAME>
| zone <NAME> |
Configures the device‘s zone/area
- <NAME> – Specify the zone/areaname.
|
Example
nx9500-6C8809(config-profile-testNX9000)#szone Ecospace
nx9500-6C8809(config-profile-testNX9000)#show context include-factory | include
zone
zone Ecospace
nx9500-6C8809(config-profile-testNX9000)#
Related Commands
| no |
Removes the zone configured on this profile or device |
