Wireless Controller, Service Platform and Access Point CLI Reference Guide

Configures the Smart RF power settings over both 2.4 GHZ and 5.0 GHZ radios

Supported in the following platforms:

Access Points — AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

assignable-power [2.4GHz|5GHz] [max|min] <1-20>

Parameters

assignable-power [2.4GHz|5GHz] [max|min] <1-20>


2.4GHz [max\|min] <1-20>	Assigns a power range on the 2.4 GHz band max <1-20> – Sets the upper limit from 1 dBm - 20 dBm (default is 17 dBm) min <1-20> – Sets the lower limit from 1 dBm - 20 dBm (default is 4 dBm)
5GHz [max\|min] <1-20>	Assigns a power range on the 5.0 GHz band max <1-20> – Sets the upper limit from 1 dBm - 20 dBm (default is 17 dBm) min <1-20> – Sets the lower limit from 1 dBm - 20 dBm (default is 4 dBm)

Examples

nx9500-6C8809(config-smart-rf-policy-test)#assignable-power 2.4GHz max 20

nx9500-6C8809(config-smart-rf-policy-test)#assignable-power 2.4GHz min 8

nx9500-6C8809(config-smart-rf-policy-test)#show context
smart-rf-policy test
 assignable-power 2.4GHz max 20
 assignable-power 2.4GHz min 8
 area test channel-list 2.4GHz 1,2,3
nx9500-6C8809(config-smart-rf-policy-test)#

Related Commands


no (smart-rf-policy-config-mode-command)	Resets assignable power to its default