tunneled-vlan

Defines the VLAN that connected clients use to route GRE tunneled traffic within their respective WLANs

Supported in the following platforms:

Access Points — AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

tunneled-vlan <VLAN-ID>

Parameters

tunneled-vlan <VLAN-ID>


tunneled-vlan <VLAN-ID>	Specifies the VLANs associated with this GRE tunnel <VLAN-ID> – Specify the VLAN IDs. Specify a comma-separated list of IDs, to specify multiple VLANs. For example, 1,10,12,16-20.

Example

nx9500-6C8809(config-profile test410-gre-tunnel-test)# tunneled-vlan 10

nx9500-6C8809(config-profile test410-gre-tunnel-test)#show context
 gre tunnel testGRETunnel
  peer 1 ip 192.168.13.6
  native vlan 1
  tunneled-vlan 1,10
  native tagged
  dscp 20
  failover interval 200 retry 5
nx9500-6C8809(config-profile test410-gre-tunnel-test)#

Related Commands


no	Removes the GRE tunnel settings based on the parameters passed