payload-size (iot-device-type-imagotag-policy)

Configures the maximum size of the payload in packets exchanged between ESL communicator and tags

Supported in the following platforms:

Access Points — AP8432
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

payload-size <1-32>

Parameters

payload-size <1-32>


payload-size <1-32>	Configures the packet‘s payload size <1-32> – Specify the value from 1 - 32 bytes. The default setting is 32 bytes. Note: SES-Imagotags recommends NOT to change the default setting.

Examples

nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#payload-size 25

nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#show context
 iot-device-type-imagotag-policy ImagoTagPolicy
  enable
  output-power Level-B
  payload-size 25
  fcc-enable
  channel 9
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#

Related Commands


no (iot-device-type-imagotag-policy)	Reverts the payload size to default (32 bytes)