override-smart-rf
Enables dynamic channel switching for Smart RF radios. This
command allows you to configure an override list of channels that Smart RF can use for
channel compensations on 2.4 GHz and 5.0 GHz radios.When a radio fails or is faulty, a
Smart RF policy provides automatic recovery by instructing neighboring access points to
increase their transmit power to compensate for the coverage loss. Once correct access
point placement has been established, Smart-RF can optionally be leveraged for automatic
detector radio selection. Smart-RF uses detector radios to monitor RF events and can
ensure availability of adequate detector coverage.
Supported in the following platforms:
- Access Points — AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562,
AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
override-smartrf channel-list [2.4GHz|5GHZ] <CHANNEL-LIST>
Parameters
override-smartrf channel-list [2.4GHz|5GHZ] <CHANNEL-LIST>
| override-smartrf |
Enables dynamic channel switching for Smart RF radios |
| channel-list |
Configures a list of channels for 2.4 GHz and 5.0 GHz Smart RF
radios |
| 2.4GHz <CHANNEL-LIST> |
Selects the 2.4 GHz Smart RF radio channels
- <CHANNEL-LIST> –
Specify a list of channels separated by commas.
|
| 5GHz <CHANNEL-LIST> |
Selects the 5.0 GHz Smart RF radio channels
- <CHANNEL-LIST> –
Specify a list of channels separated by commas.
|
Examples
nx9500-6C8809(config-rf-domain-default)#override-smartrf channel-list 2.4GHz 1,2,3
nx9500-6C8809(config-rf-domain-default)#show context
rf-domain default
contact Bob+14082778691
country-code us
override-smartrf channel-list 2.4GHz 1,2,3
layout area Ecospace floor Floor1 map-location www.firstfloor.com units meters
nx9500-6C8809(config-rf-domain-default)#
