RPS-150XT Redundant Power Supply

The RPS-150XT provides backup power to Extreme Networks stackable switches. If for some reason the switch loses power from its internal power supply, the RPS-150XT can provide up to 150 W maximum operating power to support switch operation.

The power supply ships with the following:
  • RPS cable
  • Four rubber feet (for flat surface installation)
The RPS-150XT is compatible with the following Extreme Networks switches:
  • ExtremeSwitching 220-24t-10GE2 switch
  • ExtremeSwitching 220-48t-10GE4 switch
Click to expand in new window
RPS-150XT Front Panel
1 = Captive screws 4 = Fan
2 = Status LEDs 5 = AC power input connector
3 = Handle  
Click to expand in new window
RPS-150XT Rear Panel
1 = 14-pin Redundant Power Supply connector  

See RPS-150XT Connector for pin locations and function.

Click to expand in new window

RPS-150XT LED Status Definitions

LED LED Color Status
AC OK Green AC input within operational range
Off No AC voltage or AC voltage is outside the operational range

For technical specifications, see RPS-150XT Redundant Power Supply Technical Specifications.