Installing an RPS-150XT in a Rack

To install the RPS-150XT in the three-slot modular shelf (STK-RPS-1005CH3), you must first install the shelf in a 19-inch rack.

Caution

Caution

Observe all precautions when handling sensitive electronic equipment.
Caution

Caution

Before rack-mounting the device, ensure that the rack can support it without compromising stability. Otherwise, personal injury and/or equipment damage may result.

To install the RPS-150XT in a rack, follow these steps.

  1. Secure the front of the three-slot modular shelf (STK-RPS-1005CH3) to the rack by screwing four rack screws into the mounting ears on the right and left front of the shelf.
    See Securing the Three-slot Modular Shelf to a Rack.
    Click to expand in new window
    Securing the Three-slot Modular Shelf to a Rack
    ../../_Common/../Summit_Family_HW_Install/Graphics/rps_ins_tray.png
  2. Slide the power supply into an empty bay in the shelf.
    See Installing an RPS-150XT Power Supply Unit in a Shelf.
    Click to expand in new window
    Installing an RPS-150XT Power Supply Unit in a Shelf
    ../Graphics/rps_ins_ps_150XT.png
  3. Tighten the captive screws to secure the power supply to the shelf.
  4. Connect the RPS-150XT to its power source.