RPS-150XT Redundant Power Supply Technical Specifications

The following tables list the specifications for the 150 W RPS-150XT Redundant Power Supply unit (model 10932).

Click to expand in new window

Physical Specifications

Dimensions 4.1 H x 15.4 W x 30.0 D (cm) 1.61 H x 6.1 W x 11.8 D (in)
Weight (unit only) 1.5 kg (3.3 lb)
Weight (unit and packaging) approximately 3 kg (6.6 lb)
Click to expand in new window

Power Specifications

AC input frequency 50/60 Hz (range 47-63 Hz)
AC input voltage 100-240 V../Graphics/AC_PowerSymbol_9pt.svg (range 90-264 V../Graphics/AC_PowerSymbol_9pt.svg)
AC input current 2 A maximum (range 2 A at 100 V, 1 A at 200 V)
DC output +12.0 V../Graphics/DC_PowerSymbol_9pt.svg, 13 A maximum
Maximum output power 156 W
Click to expand in new window

Environmental Specifications

Operating temperature 0°C to 60°C (32°F to 140°F)
Storage temperature -45°C to 85°C (-49°F to 185°F)
Operating relative humidity 10% to 90% operating/95% non-condensing

RPS-150XT Connector

See RPS-150XT Connector Pin Locations and RPS-150XT Connector Pin Functions for pin locations and function.



The following information is for troubleshooting purposes only. For proper operation, use only the RPS cable supplied with the RPS-150XT. This cable is specially designed for this application and meets all necessary regulatory and safety standards.


The use of non-approved cables will void your warranty.
Click to expand in new window
RPS-150XT Connector Pin Locations
1 = Pin 1 3 = Pin 8
2 = Pin 7 4 = Pin 14
Click to expand in new window

RPS-150XT Connector Pin Functions

Pin Function Pin Function
1 Ground 8 Spare pin
2 Spare pin 9 Spare pin
3 12 V power 10 Power present
4 12 V power 11 Start 1
5 12 V power 12 Start 2
6 12 V power 13 Power good
7 Ground 14 Ground