Summit X440-48p-10G Switch Ports and Slots

The front panel of the Summit X440-48p-10G switch includes:

• Forty-eight fixed autosensing 10/100/1000BASE-T PoE+ ports (ports 1–48). In addition to 48 Gbps of high-density copper connectivity, these ports also provide a full 30 Watts of PoE+ per port. This switch provides a total switch PoE power budget of 380 Watts.

• Two unpopulated SFP ports (ports 47 and 48) that provide 2 Gbps of fiber connectivity. The SFP ports support both 100BASE-FX and 1000BASE-X optical modules.

  Ports 47 and 48 are implemented as shared ports that pair a copper port with a fiber port. For more information about combination ports, see Combination Ports and Failover.

  For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.

• Two unpopulated SFP+ ports (ports 49 and 50) that provide 20 Gbps of fiber connectivity.

• Ethernet management port.

• Serial console port implemented as an RJ45 connector, used to connect a terminal and perform local management.

• LEDs to indicate port status and switch operating conditions.

  For a description of the LEDs and their operation, see Summit X440 Series Switch LEDs.

1 = Ethernet management port	5 = Console port
2 = 10/100/1000BASE-T PoE+ ports	6 = Combination ports
3 = SFP ports	7 = SFP+ ports
4 = Stack number indicator

1 = AC power input connector

2 = Redundant power connector