Console Connector Pinouts

Pinouts for the DB-9 Console Connector describes the pinouts for a DB-9 console plug connector.

Click to expand in new window

Pinouts for the DB-9 Console Connector

Function Pin Number Direction
DCD (data carrier detect) 1 In
RXD (receive data) 2 In
TXD (transmit data) 3 Out
DTR (data terminal ready) 4 Out
GND (ground) 5 -
DSR (data set ready) 6 In
RTS (request to send) 7 Out
CTS (clear to send) 8 In

Null-Modem Cable Pinouts shows the pinouts for a 9-pin to 25-pin (RS-232) null-modem cable.

Click to expand in new window
Null-Modem Cable Pinouts
../Graphics/25pin.svg

PC-AT Serial Null-modem Cable Pinouts shows the pinouts for a 9-pin to 9-pin (PC-AT) null-modem serial cable.

Click to expand in new window
PC-AT Serial Null-modem Cable Pinouts
../Graphics/9pin.svg

RJ45 Console Port on Switch shows the pinouts for the RJ45 console port on the ExtremeSwitching switches.

Click to expand in new window

RJ45 Console Port on Switch

Function Pin Number Direction
CTS (clear to send) 1 In
DTR (data carrier detect) 2 Out
TXD (transmit data) 3 Out
GND (ground) 4
GND (ground) 5
RXD (receive data) 6 In
DSR (data set ready) 7 In
RTS (request to send) 8 Out

Pinouts for an RJ45 to DB-9 Adapter shows the pinouts for an RJ45-to-DB-9 adapter.

Click to expand in new window

Pinouts for an RJ45 to DB-9 Adapter

Signal RJ45 Pin DB-9 Pin
CTS (clear to send) 1 8
DTR (data carrier detect) 2 6
TXD (transmit data) 3 2
GND (ground) 4 5
GND (ground) 5 5
RXD (receive data) 6 3
DSR (data set ready) 7 4
RTS (request to send) 8 7