AP3020 Hardware Ports and Connectors

The following graphic and table show the available AP3020 ports.

Table 1. AP3020 Ports and Connections
Item	Port	Description
1	Kensington security slot	A security feature that prevents someone from removing the AP. This is an optional task
2	Console port	Micro USB console port for a serial connection between your management system and the access point. Use the port when you troubleshoot the AP. Tip: The best practice is to use the Extreme Networks micro USB cable (ACC-WIFI-MICRO-USB). When you connect to the device, the management station must have a VT100 emulation program, such as the terminal emulator TeraTerm Pro or Hilgraeve HyperTerminal. Set your baud rate to 115200. Caution: The console port can only be used with the Extreme Networks console cable. You could damage the AP if you use another cable.
3	Reset button	Perform a reboot or factory reset.
4	2.0 USB Type A, 5V/1A with PoE 802.3at.	Used with a thumb drive or other external device. The USB port has a locking mechanism that prevents devices plugged into the port from being dislodged.
5	ETH0/PoE port	Ethernet port with RJ45 connectors: ETH0: 100/1,000/2,500 Mbps auto-sensing link speed Ethernet port, PoE PD. 802.3az Energy-Efficient Ethernet (EEE).