This installation guide for the Extreme Networks AP3020 and AP3020X covers hardware specifications, mounting procedures, network onboarding, and regulatory compliance for a Wi-Fi 7 (802.11be) universal indoor access point targeted at high-density environments such as schools, warehouses, healthcare facilities, and stadiums. Both models feature a dual 2x2 radio design, a dedicated sensor, two IoT radios (Bluetooth 5.4 LE, Thread/Zigbee-ready, IEEE 802.15.4), and a single multi-rate ETH0 port (100/1000/2500 Mbps). The AP3020 uses internal antennas; the AP3020X uses external antennas with an integral 6 GHz antenna. Four software operating modes are supported — Mode 1 (2.4/5 GHz), Mode 2 (5/6 GHz), Mode 3 (Dual 5 GHz), and Mode 4 (2.4/6 GHz, AP3020 only, LPI only) — with Standard Power 6 GHz support varying by country. Power is delivered using 802.3af or 802.3at PoE, with USB power (5W) available under 802.3at. Security features include WPA3, L2-L7 DPI firewall, tri-frequency security, PPSK, and Extreme Fabric Attach support. Mounting procedures cover standard flat T-bar ceilings, sculpted ceiling tiles, Silhouette ceilings, 9/16-inch and 15/16-inch T-bars, beams, junction boxes, direct-to-wall, and the WNGADAPT legacy bracket adapter. Pre-installation guidance addresses site survey considerations, DHCP/DNS/NTP prerequisites, and PoE validation. Network onboarding is supported using automatic DHCP-based discovery or the ExtremeCloud IQ Mobile Onboarding App. Regulatory and compliance information covers FCC, CE, Industry Canada, and regional notices for Brazil, China, Japan, Mexico, Israel, Egypt, Thailand, Taiwan, the UK, and EU member states.
