The AP3020/X is supported on both ExtremeCloud IQ and ExtremeCloud Controller.
Both APs have an indoor dual radio design with two 2x2 radios. They also have a dedicated sensor, and two Internet of Things (IoT) radios (5 GHz and 6 GHz; Thread and Zigbee ready, Bluetooth 5.4 Low Energy, IEEE 802.15.4).
The AP3020 can be operated in one of four software modes:
| Operational Mode | Radio 1 | Radio 2 |
|---|---|---|
| Mode 1 | 2.4 GHz Full | 5 GHz Full (5.15–5.85 GHz) |
| Mode 2 | 6 GHz Full (5.945 GHz–7.125 GHz) Low Power Indoor (LPI); Standard Power (SP). | 5 GHz Full (5.15–5.85 GHz) |
| Mode 3 | 5 GHz Low (5.15–5.35 GHz) | 5 GHz High (5.5–5.85 GHz) |
| Mode 4 AP3020 only | 6 GHz Full (5.945 GHz–7.125 GHz) Low Power Indoor (LPI); Standard Power (SP) is not available. | 2.4 GHz Full |
| Operational Mode | Radio 1 | Radio 2 |
|---|---|---|
| Mode 1 | 2.4 GHz Full | 5 GHz Full (5.15–5.85 GHz) |
| Mode 2 | 6 GHz Full (5.945 GHz–7.125 GHz) Low Power Indoor (LPI); Standard Power (SP). | 5 GHz Full (5.15–5.85 GHz) |
| Mode 3 | 5 GHz Low (5.15–5.35 GHz) | 5 GHz High (5.5–5.85 GHz) |