The AP integrates with the AirDefense Service Platform (ADSP), offering an additional profile option that allows the AP to function as an AirDefense sensor or to act as a sensor and retain the ability to forward traffic.
In dedicated sensor mode, the AP operates independently from the ExtremeCloud IQ Controller while the ExtremeCloud IQ Controller continues to see the AP and display the AP Role as a dedicated AirDefense sensor. In its role as a dedicated sensor, the AP does not report statistics to the ExtremeCloud IQ Controller.
| Field | Description |
|---|---|
| Name | Name of AirDefense profile. |
| Add Server Address | The IP address of the
AirDefense servers. Provide the FQDN or IPv4 string, maximum 255 characters. Enter the IP address, then
click Note: When
using the AirDefense Base (add-on container application), provide the IP address
of the ExtremeCloud IQ
Controller
data port that is reachable by the APs and sensors.
|
| Port | Specify a port for the AirDefense
server. The default port is 443 (used with a dedicated external AirDefense Server).
Note: When using the AirDefense
Base (add-on container application), configure port number to 32032.
|
| Servers | List of IP addresses for servers. Click
to remove an IP address from the list. |
