From the Setting Up Your
Local Network dialog, you can import devices using a csv file:
-
If you have not already done so,
create the CSV file. See below for an example of a CSV file.
-
Select Import from CSV.
-
Select Choose to
navigate to the CSV file. Or, drag the file onto the dialog.
-
Select Onboard
Devices.
-
Select Finish.
Enhanced
Discovery — To take advantage of Enhanced Discovery while importing
devices through CSV, formulate a multiple-column CSV file. For example:
Table 1. Example CSV file for
Enhanced Discovery support
| Serial Number |
Primary Controller IP Address |
Secondary Controller IP Address |
Host Name |
| xxxxxxxxx-10004 |
10.xx.xxx.4 |
10.xx.xxx.5 |
|
| xxxxxxxxx-28887 |
10.xx.xxx.9 |
10.xx.xxx.6 |
|
Note
Host Name will be supported in a
future release of
ExtremeCloud IQ.
