Configure AP Templates

Create a network policy for APs (see Configure Device Templates). You can also configure an AP template directly from the Common Objects tab.

Create AP device templates with default settings for all APs, and settings that ExtremeCloud IQ applies when APs are onboarded. Default AP settings can then be modified individually as required. AP templates enable quick AP deployment, with most of the port settings already applied by the associated template. Some devices have extra possible configuration options. What you see displayed is based on the device model.

Note

Note

When AP device templates and auto-provisioning rules (see Configure Auto-Provisioning) are both in place for an AP when it is onboarded, the auto-provisioning rules are applied and the device template is ignored.
  1. Select an existing AP Template, or click to create a new template.
    • Click to edit the selected template.
    • Click to delete the selected template.
  2. For a new template, enter a name, and for an existing template, edit where necessary.
  3. Select a port or interface icon on the template graphic.
    1. To select or deselect all the ports and interfaces, choose Select All Ports or Deselect All Ports.
  4. To Assign an Ethernet port profile, see Assign an Ethernet Port Profile.
  5. To create a new radio profile for a Wi-Fi port, see Add a Radio Profile.
  6. To configure Wireless Interfaces, see Configure Wireless Interfaces for an AP Template.
  7. To configure Wired Interfaces, see Configure Wired Interfaces for an AP Template.
  8. To configure SES-imagotag, see Configure SES-Imagotag.
  9. To configure Advanced Settings, see Configure AP Device Template Advanced Settings.
  10. Select Save Port Type.

Continue configuring the network policy.