SES-Imagotag Setup

This topic outlines everything you need to consider when configuring the SES-Imagotag.

AP device considerations:
1. Ensure that the access point is getting 3AT/3AT+ power.
2. Connect ESL communicator to access point USB port.
3. Ensure that the LED on the ESL communicator is red.
ExtremeCloud IQ considerations:
1. Enable SES-Imagotag on the AP Device Template or Override for a supported AP model.
  The following access points support SES-Imagotag:
  - AP305C
  - AP410C
  - AP5010
2. Ensure that the LED on the ESL communicator is amber.

Important

Troubleshooting Tips:

No LED light on ESL communicator: Check the power supply. The AP requires 3AT/3AT+ power supply to work with a USB port.
The LED continues to be red: Check the AP logs to verify that ThinAP2 has started.
The LED continues to be Amber: Check the IP address of AP, the AP-ID, and the connectivity between the AP and the ESL server.