Configure Supplemental CLI

To use the supplemental CLI tool, first navigate to Global Settings > VIQ Management, and enable Supplemental CLI.

Use this task to update CLI commands to multiple devices simultaneously from ExtremeCloud IQ. You can save Supplemental CLI objects containing CLI commands, and the commands can then be updated for devices automatically each time you update the network policy.

Toggle Supplemental CLI On.
Select existing supplemental CLI objects using the drop-down list next to Re-use Supplemental CLI Settings.
To add a new supplemental CLI object:
1. Enter a name.
2. Enter an optional description.
3. Enter the CLI commands.
  - Enter multiple CLI commands, one command per line, not exceeding a maximum total of 8192 characters.
  - Use CLI Commands that contain IP and VLAN objects: ${ip:ip_object_name} and ${vlan:vlan_object_name}.
  - Perform a complete configuration update each time commands are appended to device configurations.
  - For Dell EMC switches, enter the CLI commands, enable, and config in the beginning of a sequence of CLI commands.