Mid-Mount Configuration with I/O Ports
Facing Front
The mid-mount, I/O ports
facing front configuration is depicted in callout 3, SSA Switch Rack Configurations. This rack mount configuration requires repositioning the
rack mount ears on both sides of the device.
To reposition the rack mount
ears for this configuration, follow these steps:
-
Unscrew the two rack mount
ear screws as shown by callout 1, Mid-Mount I/O Ports Facing Front Configuration.
-
Reposition the rack mount
ear, shown by callout 2, with the middle and power supply side screw holes.
-
Reinsert the two rack mount
ear screws, shown by callout 3.
-
Repeat step 1 through step 3 on the other side of the
chassis.
Mid-Mount I/O Ports Facing Front Configuration
1 = Ear mount screw removal |
3 = Ear mount screw insertion |
2 = Repositioning of rack mount ear |
|