Securing the Mid-Bracket (7.25-Inch Flush Mount or Mid-Mount
Assembly)
Secure the mid-bracket to the rail for a
7.25-inch post flush mount or mid-mount assembly as shown in the following
illustrations.
Securing the Mid-Bracket to the Rail (7.25-Inch Flush Mount)
1 = Four screws from extension rack
assembly |
2 = Mid-bracket |
Securing the Mid-Bracket to the Rail (7.25-Inch Mid-Mount)
1 = Four screws from extension rack
assembly |
3 = Rail ear square opening |
2 = Mid-bracket |
4 =
Cage nut |
To secure the
mid-bracket, follow these steps:
-
Align the mid-bracket (callout 2) with the four
rail slots
-
Insert and secure the four screws (callout 1) from
the rack mount extension assembly, allowing some play to adjust the mid-bracket
position within the slot space when securing the assembly to the rack
post.
-
If the assembly will be used in a mid-mount
configuration, insert a cage nut (callout 4 in Securing the Mid-Bracket to the Rail (7.25-Inch Mid-Mount)) into the rail ear square opening (callout 3).
Two cage nuts are included with the SSA
Universal Rack Mount kit.
-
Repeat these steps for the other rail.