Setting the Mode Switches

To reset a mode switch on your SSA switch, follow these steps.

  1. Power down the SSA switch.
  2. Put on the ESD wrist strap and attach it to the ground receptacle on the switch I/O ports side of the SSA switch.
  3. Remove fan module 2 from the SSA switch as described in step 1 through step 5.
  4. Toggle the appropriate switch to the opposite position relative to its current state.
  5. Reinstall fan module 2 as described in step 6 through step 8.
    Note

    Note

    Switches 7 and 8 are treated as one-time toggle switches. The system looks for a change in position since the last system reset. If the position of switch 7 has changed since the last reset, persistent storage will clear on the next reboot. If the position of switch 8 has changed since the last reset, the system password will reset to the default password on the next reboot.