Securing the SSA Switch to the Rack

1. Slide the chassis onto the rail assembly until the chassis adapter plate ears meet the rail assembly ears.
   See Securing the SSA switch to the Rack.

   

   Securing the SSA switch to the Rack

   

   1 = Flush mount configuration	3 = Rack-appropriate screws or fasteners (2)
   2 = Mid-mount configuration	4 = Black 10-32 screws (2)

2. For a flush mount rail assembly configuration, secure each side of the chassis using a user-supplied screw or fastener appropriate to your rack.
3. For a mid-mount rail assembly configuration, secure each side of the chassis using a black, 10-32 screw that comes with the rack mount kit.
   These screws are screwed into the cage nut installed in the square rail ear opening as described in step 3.