Mid-Mount Configuration with Power Supply Facing Front

The mid-mount, power supply facing front, configuration is depicted in callout 4, SSA Switch Rack Configurations. This rack mount configuration requires repositioning the rack mount ears on both sides of the device.

To reposition the rack mount ears for this configuration, follow these steps:

  1. Unscrew the two rack mount ear screws as shown by callout 1, Mid-Mount Power Supply Front Configuration.
  2. Reposition the rack mount ear towards the power supply end of the device, shown by callout 2 and the thick black arrow.
    The three-holed ear is now located in the middle of the device, facing the power supply side.
  3. Reinsert the two rack mount ear screws, shown by callout 3.
  4. Repeat step 1 through step 3 on the other side of the chassis.
    Click to expand in new window
    Mid-Mount Power Supply Front Configuration
    Graphics/ssa_mid_mnt_frnt_pow_sup.png
    1 = Ear mount screw removal 3 = Ear mount screw insertion
    2 = Repositioning of rack mount ear