AP ViewNEW!

The AP screen displays all APs on a floor on the floor map. Use this screen and controls to filter and view the different APs for a floor in a site within your ExtremeLocation Essentials managed network.

Note

If client data is deleted in ExtremeCloud IQ, all configured, cached, Live, and Historical data related to that client is also deleted from ExtremeLocation Essentials.

Note

If Reset VIQ is selected in ExtremeCloud IQ, all configured data for locations, devices, and clients is cleared from ExtremeLocation Essentials. In addition, all cached, Live, and Historical data related to that VIQ is cleared from ExtremeLocation Essentials.

To view device details for a floor:

Select the Floors link to display the Floor View.
Select AP from the toolbar.

Refer to topic Common Tools for information on the other tools available for use in the Sites screens.

The AP screen displays.
From the Floor Preferences area of the screen, select the criteria to display the AP data.
Configure the following top level parameters to view the APs:

MAC Address

Enter a specific MAC address of an access point to display on the screen.

Mac

Select a MAC address from the Mac drop down menu.

Category

Select a category from the Category drop down menu.

For more information about how to manage and use Categories, see Categories.

Zone Threshold

Select a zone threshold from the Zone Threshold drop down menu.

For more information about how to manage and use Thresholds, see Threshold Configuration and Management.
Select Save to view the AP data for the defined criteria, OR select Reset to clear the AP data.