Quick Add Tunnel Concentrators

Use this task on the ExtremeCloud IQ (Classic) interface to quickly add Tunnel Concentrator instances to ExtremeCloud IQ and to register the serial number for each instance.
  1. Log in to ExtremeCloud‌ IQ.
  2. Go to Manage > Devices.
  3. Select , then select Quick Add Devices.
  4. Select Manage your devices directly from the cloud.
  5. For Device Type, select Real.
  6. For Entry Type, select Manual.
  7. Type the Serial Number of the device.
  8. From the Device Make menu, select Tunnel Concentrator.
  9. Optional: From the Policy menu, select an existing network policy.

    If you do not already have an existing policy configured for this purpose, skip this step and add the policy later.

  10. Select Add Devices.
After you complete this procedure, you can open the Tunnel Concentrator application from ExtremeCloud IQ.
Note

Note

To open the Tunnel Concentrator application from ExtremeCloud IQ, select a Tunnel Concentrator from the Devices page to view the device details and go to one of the following locations:

  • Device Details > Monitoring > Overview

  • Device Details > Monitoring > System Information

9039477-00 Rev. AA