VSP 7400 Series Switch LEDs

The following tables describe the meanings of the LEDs on the front panel of the VSP 7400 Series switch:

VSP 7432CQ LEDs for Data Ports (1-32)

Table 1. LEDs for Data Ports (1-32)
Port Configuration Color/State Meaning
100 Gb

or 4x25 Gb

 Steady green Port OK
Blinking green Port transmitting or receiving
Slow blinking green Port disabled by software
Off No link/Fault
40 Gb

or 4x10 Gb

 Steady green Port OK
Blinking green Port transmitting or receiving
Slow blinking green Port disabled by software
Off No link/Fault

VSP 7400-48Y LEDs for Data Ports (1-54)

Note

Note

Data Ports 55 and 56 are reserved.
Table 2. LEDs for Data Ports (1-48)
Port Configuration Color/State Meaning
10/25 Gb Steady green Port OK
Blinking green Port transmitting or receiving
Slow blinking green Port disabled by software
Off No link/Fault
Table 3. LEDs for Data Ports (49-54)
Port Configuration Color/State Meaning
100 Gb

or 4x25 Gb

 Steady green Port OK
Blinking green Port transmitting or receiving
Slow blinking green Port disabled by software
Off No link/Fault
40 Gb

or 4x10 Gb

 Steady green Port OK
Blinking green Port transmitting or receiving
Slow blinking green Port disabled by software
Off No link/Fault

VSP 7400 Series Front Panel System LEDs

Table 4. VSP 7432CQ Front Panel System LEDs
Label or Type Color/State Meaning
PSU1,PSU2

(Power Supplies)

 Steady green PSU is installed and providing power
Steady amber PSU is installed but input power is disconnected or unit fault detected
Off PSU is not installed
FAN Steady green All fans operating normally
Steady amber A fan has been removed or fault detected
Off No power to fan modules
SYS

(System)

 Steady green Normal operation; agent software code has been loaded
Blinking green Loading the agent software code
Steady amber Error encountered while running diagnostic software
Blinking amber Loading and executing the boot loader or diagnostic software
Off Unit not operational
PWR

(Power)

 Steady green Normal operation
Blinking green System in reset
Off Unit not operational
Table 5. VSP 7400-48Y Front Panel System LEDs
Label or Type Color/State Meaning
PSU1,PSU2

(Power Supplies)

 Steady green PSU is installed and providing power
Steady amber PSU is installed but input power is disconnected or unit fault detected
Off PSU is not installed
FAN Steady green All fans operating normally
Steady amber A fan has been removed or fault detected
Off No power to fan modules
SYS

(System)

 Steady green Normal operation; agent software code has been loaded
Blinking green Loading the agent software code
Steady amber Error encountered while running diagnostic software
Blinking amber Loading and executing the boot loader or diagnostic software
Off Unit not operational
PWR

(Power)

 Steady green Normal operation
Blinking green System in reset
Off Unit not operational
Table 6. VSP 7400-48Y Front Panel 100/1G RJ45 Port LEDs
Label or Type Color/State Meaning
OOB Management Port

(Link/Activity)

 Steady green Network link
Blinking green Network link and activity
Off Link at 10Mbps or no activity
OOB Management Port

(Speed)

 Blinking green Port link at 100Mbps
Steady green Port link at 1000Mbps
Off Link at 10Mbps or no link
121229-01 Rev 10