VSP 7400-48Y Features

The front panel of the VSP 7400-48Y switch includes:

• 48 10/25-gigabit Ethernet ports capable of supporting passive copper SFP28 and active fiber SFP28.

• 8 100-gigabit Ethernet ports capable of supporting passive copper QSFP28 and active fiber QSFP28. These ports are configurable for 100Gb and 40Gb modes. For information about SFP28 and QSFP28 optical modules, see the Extreme Networks Pluggable Transceivers Installation Guide

  

  Note

  Channelization is not supported on these ports.

  Data Ports 55 and 56 are reserved.

• RJ45 serial console port used to connect a terminal and perform local management.

• USB port for access to external storage.

• RJ45 out-of-band 10/100/1000BASE-T management Ethernet port.

• LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their operation, see VSP 7400 Series Switch LEDs.

VSP 7400-48Y Switch - Front Panel

* - The Management Set sliding button can be slid to the right in order to free the Management Set for removal.

The rear panel of the VSP 7400 switch includes:

• Two power supply bays for 750 W AC or DC power supplies.

• Six bays for replaceable fan modules.

  

  Note

  The color of the tab on the fan tray indicates the airflow direction:

  • Red: front-to-back

  • Blue: back-to-front

  The operating-system software cannot display the airflow direction.

VSP 7400-48Y Switch - Rear Panel

Note

The power supply slot on the left is for power supply number two and the power supply slot on the right is for power supply number one.