First, configure a network policy.
Note
It is not necessary to change
the default values if devices are connected over faster links.
Adjust these
settings to accommodate situations where devices are connected over slower
links and where the data must be aggregated at different rates.
This task is part of the network policy configuration
workflow. Use this task to specify how frequently APs send data to ExtremeCloud IQ.
-
Go to .
-
Select an existing policy, and then select
, or select 
.
-
After you save the Policy
Details, select NEXT to open the 2 Wireless page.
-
From the Application Management menu, select
Presence Analytics.
-
Toggle the Enable Presence
Analytics setting ON.
-
Type a
Name.
- Optional:
Type a
Description.
Although optional, entering a description is helpful for troubleshooting and
for identification.
-
For Trap Interval,
specify (in seconds) how often the presence sensor reports data to ExtremeCloud IQ.
Lowering this interval below 15 seconds pushes data faster but also increases
network traffic. Raising this interval above 15 seconds pushes data at a
slower rate and decreases network traffic.
-
Specify the Aging Time (in
seconds) for a given presence profile.
-
Specify the Aggregate Time
interval (in seconds) for the period of time that aggregation will occur for the
presence profile.
