Configure Dynamic Channel Switching

Enable Dynamic Channel Switching (DCS) to dynamically select and switch channels based on specified criteria.

  1. Go to Configure > Common Objects > Policy > Radio Profiles.
  2. Select an existing radio profile,and then select Edit, or select Add.
  3. Enable Dynamic Channel Switching.
  4. Select Automatically select and switch channels during specified time interval.
    1. In the From field, enter the start time for the interval.
    2. In the To field, enter the end time for the interval.
    3. In the Do not switch channels if the number of connected clients exceeds field, enter the number of connected clients.
  5. Select Switch channels anytime if RF interference exceeds the threshold.
    1. In the Interference Threshold field, enter the value (%).
    2. In the CRC Error Threshold field, enter the value (%).
    3. Select Do not switch channels if clients are connected
  6. Select SAVE RADIO PROFILE.