AP3000 Series Radios and 6 GHz SupportNEW!

The AP3000 series access points (APs) are Wi-Fi 6E tri-radio APs with support for multiple Extreme Networks operating systems. The AP3000 series APs include the following models:

AP3000 — Indoor access point
AP3000X — Indoor access point with optional external antenna.

The AP3000 series APs offer two radios in three modes:

Table 1. AP3000/X Operating Modes
Mode	Radio 1 (2x2)	Radio 2 (2x2)	Radio Definitions
1 (Default)	g/n/ax	a/n/ac/ax	2.4 GHz and 5 GHz
2	ax6	a/n/ac/ax	5 GHz and 6 GHz
3	Dedicated Sensor (2.4 GHz or 6GHz)	Dedicated Sensor (5 GHz)

Radio 1:

sensor
b/g
g/n
b/g/n
g/n/ax (Default)
client-bridge
ax6

Radio 2:

sensor
a/n/ac
a/n/ac/ax (Default)
client-bridge

Note

When configuring sensor mode, set both Radio 1 and Radio 2 to sensor at the same time.

Note

The World-Wide Universal Access Points 6 GHz radios support only the following Wi-Fi Alliance (WFA) 6E Compliant network authentication methods:

OWE (Opportunistic Wireless Encryption) for Open Networks
WPA3-Personal (SAE/H2E)
WPA3-Enterprise

ExtremeCloud IQ requires that your 6 GHz radio network assignment be WFA 6E compliant. ExtremeCloud IQ rejects network configuration changes that result in 6 GHz radio network assignments that are not compliant. It might be necessary to redefine your networks when configuring the 6 GHz radio on the Universal Access Points.

For the AP3000/X, before changing the Radio 1 configuration from 2.4 GHz to 6 GHz, ensure that the AP is assigned a 6E WPA compliant network.

Note

For all Extreme NetworksAPs, use the Extreme Networks certified ACC-WIFI-MICRO-USB console cable. Other MICRO-USB console cables have not been certified by Extreme Networks.