Device Details Configuration Tasks
Go to .
ExtremeCloud IQ enables you to perform device-level configuration tasks and
update your devices at the device level. Settings made at this level apply only to the
individual device and override the template settings configured for the network policy.
After device-level settings are removed, the device automatically reverts back to the
original network policy and device template configuration. The features that display for
this tab vary depending on the type of device you selected.
After you select a switch from the Device List, you can create or modify the
following:
- Device
Configuration: Edit device details such as the host name, the
description, the device function, IP addresses, and VLAN assignments.
- Device
Management Servers: Edit management server settings for a device
associated with a network policy.
- Switch Port
Configuration: Edit switch ports, STP, Storm, and PSE settings.
- Device
Credentials: Assign or change network administrator credentials and
administrator assignments.
- SSH: Temporarily
enable SSH to troubleshoot the device.
- Web SSH (For Digital Twin only): Temporarily enables you to SSH a console into
the Digital Twin switch directly in the GUI, without the need for a
third-party SSH terminal application.
- sFlow
Receivers: (SR Series only): Provide visibility into your switch
traffic patterns.
After you select an AP from the Device List, you can create or modify the following:
- Device
Configuration: Edit device details such as the host name, the
description, the device function, IP addresses, and VLAN assignments.
- Interface Configuration: View the default template
settings and control actions for the Wireless (Wi-Fi) and
Wired (Ethernet) ports. You can edit any field that is
selectable.
- Device
Credentials: Assign or change network administrator credentials and
administrator assignments, and configure CAPWAP and Shared Key settings.
- Configure Netdump: Enable an unresponsive AP to
automatically save a core dump file to a TFTP server on the network the next
time it boots.
- Location Information: Define detailed device location
information, see Location Information Configuration Settings.
- DHCP Server
and Relay: For a small network, configure and enable a DHCP server on
a device to provide network settings dynamically to clients.
- Neighboring
Devices: Define a list of neighbor access points that will
collaborate in the Layer 3 roam process.
- Bonjour
Gateway Settings: Choose the AP you want to act as your Bonjour
Gateway Designated Device (BDD) at the device level.
- Troubleshoot:
Enable Client Monitor so devices can detect client issues, and report client
connection activities and problems to ExtremeCloud IQ.
- SSH: Temporarily
enable SSH to troubleshoot the device.
After you make changes to the configuration, you must push the configuration changes to
the device.