When you select the host name of an AP from the Devices list and then select
, the following information is displayed (APs only):
- The Route Monitor Polling Graph shows:
- A time range showing total number of routes within a 24 hour time
period.
- Route type counts:
- Direct Routes
- Static Routes
- OSPF Routes
- Total Routes
- The Y axis resizes based on chosen routes.
- The Y axis represents the total number of routes.
- The X axis represents
the poll time interval.
- Hovering over the graph displays a summary of routes with the given
timestamp.
Note
Select the graph heading to enable or disable the graph line
view.
- Within the IPv4 Routing
Table section, the destination subnetwork, next hop, VLAN
Name, VLAN ID, Route Origin, Status, Metric, Route Age, Route Type Priority,
and Routing Instance information are all listed. You can filter for the
Route Origin and Status.
Note
- Up to 100 IPv4 routes are visible within the table. For
additional visibility, use an SSH proxy.
- Switch Engine software
version 32.6.2.68 or newer is required.