Configure Management and Native VLAN Policy Settings

This task is part of the network policy configuration workflow. Use this task to configure Management and Native VLAN policy settings for a network policy.

  1. Go to Configure > Network Policies.
  2. Select an existing network policy, and then select Edit, or select Add to create a new policy.
  3. From the Policy Settings menu, select Management and Native VLAN.
  4. Select an MGT Interface VLAN from the Select menu, or select Add.
  5. For a new MGT Interface VLAN, configure the settings.
    1. Type a Name for the new VLAN object.
    2. Type a VLAN ID for the new VLAN object.
    3. If you want to use classification, select Apply VLANs to devices using classification.

      See Configure Classification Rules.

  6. Select an Native (Untagged) VLANFor IQ Engine devices only from the Select menu, or select Add.
  7. For a new Native (Untagged) VLAN, configure the settings.
    1. Type a Name for the new VLAN object.
    2. Type a VLAN ID for the new VLAN object.
    3. If you want to use classification, select Apply VLANs to devices using classification.

      See Configure Classification Rules.

  8. Select SAVE VLAN.
9038923-00 Rev AB