Configure RF Interface Reports

ExtremeCloud IQ can periodically poll APs and collect RF interface-related data. ExtremeCloud IQ forces APs to adopt a shorter polling interval if CRC error, channel interference, or short-term polling thresholds are exceeded.
Note

Note

Extreme Networks provides defaults for each item in this section. The following steps are optional.
  1. Go to Configure > Common Objects > Policy > Radio Profiles.
  2. Select an existing radio profile, and then select Edit, or select Add.
  3. Set the level of CRC errors for polling.
    The default threshold is 20% for 802.11g/n, and 35% for 802.11a and 802.11ac. The range is from 15 to 60%.
  4. Set the level of channel interference for polling.
    The default threshold is 20% for 802.11g/n, and 35% for 802.11a and 802.11ac. The range is from 15 to 60%.
  5. Set the short-term average for polling.
    The range is 5 to 30 minutes.
  6. Select SAVE RADIO PROFILE.