Configure NTP Server Policy Settings

This task is part of the network policy configuration workflow. Use this task to configure NTP Server policy settings for a network policy.

  1. Go to Configure > Network Policies.
  2. Select an existing network policy, and then select Edit, or select Add to create a new policy.
  3. From the Policy Settings menu, select NTP Server.
  4. Toggle the NTP Server setting to ON.
  5. Optional: To use existing NTP server settings, choose an NTP object from the Select menu.
  6. Configure NTP Server Settings.
  7. To add a new NTP server to the list, select Add.
    1. To use an existing NTP server, select it from the Select menu.
    2. To add a new NTP server, select Add, and then select IP Address or Host Name.
    3. Type a Name for the new IP object.
    4. Optional: If you want to change your previous selection, select IP Address or Host Name from the menu.
    5. Select SAVE IP OBJECT.
    6. Select ADD.

    ExtremeCloud IQ accesses NTP servers in order, from the top down. Use the up and down arrows to rearrange them if necessary.

  8. If you want to use classification, select Apply NTP servers to devices via classification.
  9. Select SAVE NTP SERVER.
9038923-00 Rev AB