Associate the Vendor Class Identifier option with each DHCP
scope.
In the DHCP server utility,
right-click the Server Options folder under the DHCP
scope, then select Configure Options.
Configure
Options
The Scope Options
window displays.
Click the Advanced
tab.
Vendor Class Option
078
Vendor Class
Select the vendor
class that you plan to use. For example, AP410 or AP460.
Available Options
Select a predefined
sub-option to assign to this scope. The option must be checked and
highlighted to display Data Entry options.
Data Entry
(Option 078 Only)
Enter the controller IP addresses to return to the APs. This is a
comma-delimited list.
Click OK.
DHCP Option 43 is now
configured. This DHCP option is available for all the DHCP scopes that are
configured in the DHCP server. When an AP requests vendor specific information,
the DHCP server sends the ExtremeCloud IQ
Controller
IP addresses in Option
43 to the AP.
