Before you create a site, know the following information about your network:
AP licensing domain
AP models.
For this deployment scenario, the licensing domain is ROW (Rest of World).
For this deployment scenario, the AP model is AP3915.
Go to Configure > Sites > Add and configure the following parameters:
Name
Site_Row
Country
Select Toronto Canada.
This
value corresponds to the licensing domain ROW.
Timezone
Canada: America/Toronto
Create one or more device groups for the
site.
All APs in a device group must share the following:
AP model number
Configuration Profile
RF Management Profile
Go to Configure > Sites and select a site. Then, select Device Groups > Add and configure the following parameters:
Name
DeviceGroup_AP3915
Profile
AP3915-default
Select a
configuration profile for the AP model. The configuration profile is specific to
the AP model.
RF Management
Select Default ACS.
This
option displays after you have selected the configuration profile, because the RF
Management options depend on the selected configuration profile. A Centralized
site supports the following AP models:
AP39xx supporting ACS Policy
for RF Management
AP3xx, AP4xx, AP5xx.
Note
AP4xx and AP5xx currently
require manual channel plan configuration when used in a Centralized site.
Go to Configure > Devices > Access
Points and select an AP5xx model. For more information, see Configure AP Radio
Settings in the ExtremeCloud IQ Controller User Guide.
Select from the list of discovered APs.
Auto-discovered APs that match the selected configuration profile display in a list on
the Create Device Group dialog.
Select OK.
Create Device Group AP3915
Select Save on the Site page to save the site and
device group.
