Configure a network and be aware of policy
roles that you are using before modifying the device group profile.
Go to Configure > Sites and select a site.
Click Device
Groups.
Select DeviceGroup_AP3915.
Beside the Profile field, select
to edit the default profile AP3915-default.
From the Networks tab,
assign a radio to the network you created.
From the Radios tab verify that the radio that your
network is assigned to is on and using the correct radio mode.
From the Roles tab, select
the Accept Policy roles that the Rules Engine is using.
Note
Upon creating an internal
captive portal network, the rules engine created two engine rules that make
use of the following policies:
Enterprise User
Unregistered
External Captive Portal networks use the Unregistered policy by
default, there is no user interaction.
Edit Device Group
Profile (Internal Captive Portal)
Optionally, you can configure
settings from any of the available profile options. All APs in the device group
are affected by options configured in the profile.
Note
The supported profile
options depend on the AP Platform definition.
Click Save to save the profile settings.
Click Close to close
DeviceGroup_AP3915
Currently, Site_ROW has
DeviceGroup_AP3915 with the following:
to edit the default profile AP3915-default.
